view article
Figure 3
Pulsed-resolved intensity data at different repetition rates (4.5 MHz, 2.25 MHz and 1.1 MHz) taken with diamond-based intensity monitors at MID. (b) Zoomed-in image of (a) showing that the detector response is fast enough to accurately measure pulse intensities at a 4.5 MHz repetition rate. The duration of the pulse signal (approximately 150 ns FWHM) reflects the speed of the electronics and detector, not the X-ray pulse duration, which is less than 100 fs. (c) Correlation with the upstream gas monitor for the 1st, 10th and 100th pulse (2.2 MHz pulse repetition rate).

Journal logoJOURNAL OF
SYNCHROTRON
RADIATION
ISSN: 1600-5775
Volume 31| Part 3| May 2024| Pages 596-604
https://doi.org/10.1107/S1600577524001279
Follow J. Synchrotron Rad.
Sign up for e-alerts
E-alerts
Follow J. Synchrotron Rad. on Twitter
Twitter
Follow us on facebook
Facebook
Sign up for RSS feeds
RSS